PHASE 3 U-2 64mm EDF SPY PLANE 1.7m Unboxing

Děkujeme! Podělte se svými přáteli!

Nelíbí sa vám video. Děkujeme za zpětnou vazbu!

Vloženo před 4 roky by

215 Zobrazení

Petrinčič Brothers Aviation Tshirts here: https://shop.spreadshirt.com/petrini-brothers-rc-aviation

Specification:

In the early 1950s, with Cold War tensions on the rise, the U.S. military required better strategic reconnaissance to help determine Soviet capabilities and intentions. It was thought an aircraft that could fly at 70,000 feet would be beyond the reach of Soviet fighters, missiles, and even radar. Phase 3 brings the iconic U2 spyplane to life in a high performance EDF that represents outstanding value. Manufactured from lightweight foam in a receiver ready format so you’ll be ready for your first exciting mission in no time!

Flying the U-2 Spyplane
The Phase 3 U-2 Spyplane is essentially a powered glider and it can be flown in a very scale-like manner. While it is not suitable for beginners, it does make a very good second aileron model. With the assistance of a helper, switch on the transmitter, then connect a fully charged 1650-2200 mah 11.1V Li-Po battery. Refit the canopy and check the control throws. If there is any wind, ask you helper to point the model into it. Open the throttle fully, then have your helper launch the U-2 slightly nose down with a firm push keeping the wings level. Allow the model to fly straight and continue to hold the power on until sufficient height has been gained.

The U-2 is best flown smoothly, trading height for speed for gentle aerobatic maneuvers. The wings will flex in flight - as did the full size - but you should avoid pulling very high-G maneuvers when flying at full speed or after a steep dive to avoid over-stressing the airframe.

Landing presents no difficulties and the U-2 can be simply lined up into the wind and the motor power reduced until the model settles into its glide path. Once landed, please unplug and remove the Li-Po battery from the model and allow it to cool completely before recharging.

FEATURES:
Wingspan: 1,690mm (66 1/2 Inches)
Length: 1,030mm (40 1/2 Inches)
Simple and Quick to Assemble
Durable, Lightweight Molded Foam Airframe
No Glue Required!
Realistic Stealth Color Scheme
Easy Access to Battery Via Large Canopy
Custom, Powerful Brushless Motor Included
High Performance Fan Unit Included
3 x Factory Fitted Servos (2 ailerons and elevator)
Smooth, Fast and Stable Flying
REQUIRES:
4-Channel or More Radio System with Mini or Micro Receiver
3S 1650mAh to 2200mAh Li-Po Battery
Li-Po Battery Charger