Bango 2 RC Trainer Plane for Beginner

Děkujeme! Podělte se svými přáteli!

Nelíbí sa vám video. Děkujeme za zpětnou vazbu!

Vloženo před 3 roky by

180 Zobrazení

Bango v2 is an answer to many request for another simple plane design and a
trainer for beginner. It was designed to surpass Bango v1 performance. The main goal is still the same, which is a trainer plane that is easy to fly and can
withstand hard landing even crashes. Because I know beginners usually afraid
to crashing their plane, so they held back. That's why I made Bango 2 so new
pilots don't have to worry damaging their RC plane when hard landing or
crashing. By moving the motor the the center and on the back of the plane
make it free to propeller strike to the ground. Also build the vertical stab with 2
layer of foams gives Bango 2 more rugged than Bango 1. Rudder and elevator
servo placement that are outside the fuselage also an ease for beginner to
install. Bango 2 also equipped with detachable landing gear, if you hard
landing with landing gear attached, it will detached by itself and will not
damage the fuselage, because the landing gear just held by 2 rubber bands.

SUBSCRIBE and Like to support this channel
#bango #rctrainerplane #buildvideo

You can download the plans on the link below :
http://paper-replika.com/index.php?option=com_content&view=article&id=9620:bango-2-rc-trainer-plane-for-beginner&catid=144:rc-projects&Itemid=207908

Playlist :
02:06 Plans Preparation
04:06 Fuselage
06:34 Stabilizers
07:32 Covering the Fuselage
10:36 Wing
13:13 Wing Mounting
14:13 Landing Gear
16:32 Aileron
17:31 Servos
21:30 Installing motor
23:32 RC Electric Plane Basic Knowledge
45:10 Maiden Flight
54:27 Review
57:03 Crash Compilation
59:36 Next Project?

Specs :
1. Wingspan 1450mm / 57 inches
2. Flying weight : 835 grams/ 29.5 oz
3. Wing loading : 33.4 g/dm2 - 10.9 oz/sq.ft
4. Wing cube loading : 6.7
5. Wing Area : 25 dm2 / 391 sq.in
6. CG : 4.5 cm from LE

Electronics
- Turnigy 2826 2200kv brushless motor
- ESC 40A
- Battery Lipo 3S 2200mah
- 4 plastic gear 9 gram servos
- Propeller : 6x4

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm, 9 mm Plywood
3. hot glue + Epoxy Glue
4. 3mm bicycle wheel spoke wire
5. white packing tape
6. chopsticks
7. Plastic straw