FLIGHTLINE RC 1600MM SPITFIRE MK.1X (63" WINGSPAN) DEANO FLIGHT TEST - 2018

Děkujeme! Podělte se svými přáteli!

Nelíbí sa vám video. Děkujeme za zpětnou vazbu!

Vloženo před by
362 Zobrazení
THIS GORGEOUS MODEL IS AVAILABLE FROM SEVERAL OUTLETS BUT I BOUGHT HER FROM MOTION RC EUROPE -

CHECK OUT THEIR WEBSITE HERE - https://www.motionrc.eu/

SHE WAS ORDERED THEN DELIVERED WITHIN FOUR DAYS FROM MAINLAND EUROPE TO THE UK WITH FREE SHIPPING !


WE ARE FLYING HER ON A SPEKTRUM DX 18 TX,

AND POWERING HER WITH AN OPTIPOWER 6 CELL 5000 MAH 50C LIPO,


WE GET 7 MINS FLYING ON VARIOUS THROTTLE SETTINGS WITH 35% LEFT IN THE BATT,

IF WE FLY HER HARD WE HAVE AROUND 20% LEFT IN THE BATT !

This elegant model aircraft is equipped with a 5055-390KV brushless outrunner motor, 80A ESC, and scale 4-blade propeller. With the recommended 6S 4000-5000mAh lipo battery, the Spitfire MK.IXc has a level top speed of 125kph/75mph, with tall vertical power and 6-10 minutes of flight time depending on throttle management.

Delivering capable grass handling performance, the main landing gear use shock absorbing Oleo struts, a main wheel diameter of 85mm, and a tail wheel diameter of 45mm. Metal reinforcement plates, 5mm thick steel strut pins and axles, and metal trunions work together with the suspension struts and soft wheels to dampen the forces caused by operating this aircraft on rough runways.

The FlightLine RC 1600mm Spitfire Mk.IXc was optimized for sport scale performance, gentle handling, and an almost effortless flying experience, suitable for intermediate pilots and above. Importantly, a very predictable stall and power on recovery make the aircraft easy to control throughout all stages of flight. Day-Bright LEDs also aid in visibility of this large and beautiful foam electric model aircraft.

Features:
Grass capable landing gear with suspension struts and 5mm thick steel pin and metal trunion
Scale four panel split flaps
Big 16x10 Propeller, 5055-390KV brushless motor and 80A ESC with EC5 connector
LED wingtip lights and dorsal signal light
17g digital hybrid servos, brass ball links, and nylon hinges on all control surfaces

Machine Screw Inserts moulded into the spinner backplate to easily adjust blade tracking while mounted on the motor
Removable wings, cannon, and antenna for easy transport
Central Control Board for organized wiring
Access holes to adjust Elevator/Rudder linkages without removing the wing

Gyro ready plywood area near CG location
Two decal sets included: MA621 DV-A, Squadron Leader Tony Gaze, 129 Squadron, 1943 and BS393 GW-Z for Lt. Michel Boudier, 340 Squadron, 1942
Additional sets made available by Callie Graphics, including George Beurling, Pierre Clostermann, etc.

Includes:
FlightLine RC Spitfire Mk.IX 1600mm (63") Wingspan - PNP
Motor, ESC, servos, LED lights and retracts pre-installed

PLEASE CLICK ON THE LIKE BUTTON & LEAVE A COMMENT FOR US & SUBSCRIBE TO OUR CHANNEL 'TBOBBORAP1' & LIKE US ON FACEBOOK & FOLLOW US ON TWITTER NOW AND KEEP UP TO DATE AND WATCH OUR DAILY UPLOADED HD / 4K QUALITY RC MODELS VIDEOS AND PICTURE UPDATES OF THE MAJOR UK RC SHOWS AND CLUB FLY-INS AT -

https://www.facebook.com/pages/Tbobbo...

https://twitter.com/TBOBBORAP1

https://www.youtube.com/user/tbobborap1

FILMED DOWN THE PATCH ON 22-10-2018,
Kategorie
RC Stíhačky

Napište svůj komentář

Komentáře

Buďte první, kdo to okomentuje!